REN Cheng, LI Cong-xin, YANG Xing-tuan. Investigation on Thermocouple Signal Fluctuation Phenomenon in Environment Simulation Facility of High Temperature Gas-cooled Reactor[J]. Atomic Energy Science and Technology, 2014, 48(增刊1): 588-593. DOI: 10.7538/yzk.2014.48.S0.0588
Citation: REN Cheng, LI Cong-xin, YANG Xing-tuan. Investigation on Thermocouple Signal Fluctuation Phenomenon in Environment Simulation Facility of High Temperature Gas-cooled Reactor[J]. Atomic Energy Science and Technology, 2014, 48(增刊1): 588-593. DOI: 10.7538/yzk.2014.48.S0.0588

Investigation on Thermocouple Signal Fluctuation Phenomenon in Environment Simulation Facility of High Temperature Gas-cooled Reactor

More Information
  • A material performance test facility simulating the inside temperature and atmosphere environment of the high temperature gas-cooled reactor was built by the Institute of Nuclear and New Energy Technology of Tsinghua University. All kinds of tests under high temperature (≤1600 ℃) carbon reducing environment could be conducted in the facility. During the test, strong disturbance caused by the central large current heating was found to be imposed on the thermocouple signals. A high-frequency random fluctuation with the amplitude of 50 ℃ was superimposed on the original temperature signals. Based on the NI high-speed synchronous acquisition technology, the signal interference analysis test was carried out and the interference source and path were determined. Finally aimed at its self pattern of the interference signal, an anti-interference software method was proposed to solve the thermocouple signal fluctuation phenomenon and successfully guarantee the accurate temperature control and measurement in the test zone.
  • [1]
    ABRAM T, ION S. Generation Ⅳ nuclear power: A review of the state of the science[J]. Energy Policy, 2008, 36(12): 4323-4330.
    [2]
    LOHNERT G H. Technical design features and essential safety-related properties of the HTR-module[J]. Nuclear Engineering and Design, 1990, 121(2): 259-275.
    [3]
    ZHANG Zuoyi, YU Suyuan. Future HTGR developments in China after the criticality of the HTR-10[J]. Nuclear Engineering and Design, 2002, 218(1): 249-257.
    [4]
    SHIOZAWA S, FUJIKAWA S, IYOKU T, et al. Overview of HTTR design features[J]. Nuclear Engineering and Design, 2004, 233(1): 11-21.
    [5]
    TANG Chunhe, TANG Yaping, ZHU Junguo, et al. Design and manufacture of fuel element for the 10 MW high temperature gas-cooled reactor[J]. Nuclear Engineering and Design, 2002, 218(1): 91-102.
    [6]
    GAO Zuying, SHI Lei. Thermal hydraulic transient analysis of the HTR-10[J]. Nuclear Engineering and Design, 2002, 218(1): 65-80.
    [7]
    ROUSSEAU P G, van STADEN M. Introduction to the PBMR heat transfer test facility[J]. Nuclear Engineering and Design, 2008, 238(11): 3060-3072.
    [8]
    REN Cheng, YANG Xingtuan, SUN Yanfei. Porous structure analysis of the packed beds in a high-temperature reactor pebble bed modules heat transfer test facility[J]. Chin Phys Lett, 2013, 30(2): 022801.

Catalog

    Article views (151) PDF downloads (1090) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return