ZHENG Li-fang, LI Shuai, QIAN Xun, WANG Li. Pre-irradiation Effect on Corrosion of Be in EDM-1[J]. Atomic Energy Science and Technology, 2017, 51(7): 1336-1341. DOI: 10.7538/yzk.2016.youxian.0589
Citation: ZHENG Li-fang, LI Shuai, QIAN Xun, WANG Li. Pre-irradiation Effect on Corrosion of Be in EDM-1[J]. Atomic Energy Science and Technology, 2017, 51(7): 1336-1341. DOI: 10.7538/yzk.2016.youxian.0589

Pre-irradiation Effect on Corrosion of Be in EDM-1

More Information
  • The rotary corrosion experiment device was built to study the pre-irradiation effect on corrosion of Be in EDM-1 (No.1 electrical discharge machining oil). With the samples, the mass variations were measured by scales, the microstructure was observed by scanning electron microscope and the composition was analyzed by X-ray photoelectron spectroscopy, respectively. The results indicate that the chemical reaction between the Be and EDM-1 is dominated and corrosive products are generated in the initial experimental stage. Then the mechanical scour becomes the main process in Be corrosion. SOx and SO2 are adsorbed chemically on the surface and physically in interior of the corrosive products, respectively. It is revealed that the degree of Be corrosion is serious, reasonable and weak respectively with pre-irradiation only by γ-rays, with pre-irradiation both by neutrons and γ-rays and without pre-irradiation. As a conclusion, the pre-irradiation can promote the corrosion of Be in EDM-1.
  • [1]
    吴源道. 铍:性质、生产和应用[M]. 北京:冶金工业出版社,1986:1-6.
    [2]
    宁夏有色金属研究所. 铍的应用[M]. 北京:冶金工业出版社,1973:33-40.
    [3]
    SPEER W, ES-SAID O S. Applications of an aluminum beryllium composite for structural aerospace components[J]. Engineering Failure Analysis, 2004, 11(6): 895-902.
    [4]
    FRIDLYANDER I N. High-modulus aluminum alloys with beryllium and magnesium[J]. Metal Science and Heat Treatment, 2003, 45(9-10): 348-350.
    [5]
    郑莉芳,纪全,王立,等. 粉末冶金态铍在北京谱仪束流管中的应用[J]. 原子能科学技术,2008,42(1):87-91.ZHENG Lifang, JI Quan, WANG Li, et al. Application of powder metallurgy beryllium in Beijing Spectrometer Ⅲ beam pipe[J]. Atomic Energy Science and Technology, 2008, 42(1): 87-91(in Chinese).
    [6]
    魏光荣,张维杰. 铝合金、铍和不锈钢在含硼、钆等水介质中的低温腐蚀行为的研究[J]. 核动力工程,1984,5(2):41-46.WEI Guangrong, ZHANG Weijie. Study on the low temperature corrosion behavior of Al, Be and stainless steel in the aqueous medium of boron and gadolinium[J]. Nuclear Power Engineering, 1984, 5(2): 41-46(in Chinese).
    [7]
    机械工业仪器仪表综合技术经济研究所. JB/T 7901—1999金属材料实验室均匀腐蚀全浸试验方法[S]. 北京:中国机械工业出版社,1999.
    [8]
    王旭,刘臣,王兰芳,等. 强流脉冲离子束辐照对不锈钢耐腐蚀性能的影响[J]. 强激光与粒子束,2007,19(5):845-848.WANG Xu, LIU Chen, WANG Lanfang, et al. Effect of strong flow pulse ion beam irradiation on the corrosion resistance of stainless steel[J]. High Power Laser and Particle Beam, 2007, 19(5): 845-848(in Chinese).
    [9]
    RICHARDSON R C D. The maximum hardness of strained surfaces and the abrasive wear of metals and alloys[J]. Wear, 1967, 10(5): 353-382.
    [10]
    RICHARDSON R C D. The wear of metals by relatively soft abrasives[J]. Wear, 1968, 11(4): 245-265.
    [11]
    MOORE M A, KING F S. Abrasive wear of brittle solids[J]. Wear, 1980, 60(1): 123-140.
    [12]
    MALLINSION C F, CASTLE J E, WATTS J F. The electron spectra of beryllium and beryllium oxide: An XPS, X-AES and AES study[J]. Surface and Interface Analysis, 2014, 46(10-11): 989-992.
    [13]
    SAYAGO D I, SERRANO P, BÖHME O. Adosorption and desorption of SO2 on the TiO2 (110)-(1×1) surface: A photoemission study[J]. Physical Review B, 2001, 64(20): 1-7.

Catalog

    Article views (127) PDF downloads (840) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return