QIN Cheng, ZHU Zhibin, YANG Yu, WU Qingfeng, DOU Yuling, WANG Xiulong. Design of 325 MHz High Power RF Window[J]. Atomic Energy Science and Technology, 2020, 54(5): 870-875. DOI: 10.7538/yzk.2019.youxian.0582
Citation: QIN Cheng, ZHU Zhibin, YANG Yu, WU Qingfeng, DOU Yuling, WANG Xiulong. Design of 325 MHz High Power RF Window[J]. Atomic Energy Science and Technology, 2020, 54(5): 870-875. DOI: 10.7538/yzk.2019.youxian.0582

Design of 325 MHz High Power RF Window

More Information
  • In order to make sure that the drift tube linac could work more stable and the transmission power could be fed into the linac better, the waveguide window of accelerating structure was designed and studied in this paper. The structure of waveguide window was calculated by CST, and the RF parameters were analyzed and optimized by improving the matching structure. Then the frequency bandwidth, electric field distribution and power loss were calculated by the simulation result. Besides, the thermal analysis of the RF window was carried out, and the flow rate of the cooling water was calculated by the formula. The result shows that the waveguide window can be applied to the 325 MHz acceleration structure.
  • [1]
    FROLOVA T A. Optimization of breeding properties of the spallation neutron source target for ADS[J]. Nuclear Energy and Technology, 2017, 3(1): 60-64.
    [2]
    陈和生. 中国散裂中子源[J]. 现代物理知识,2016,28(1):3-10.
    [3]
    LIU Huachang, PENG Jun, GONG Keyun, et al. The design and construction of CSNS drift tube linac[J]. Nuclear Instruments and Methods in Physics Research A, 2018, 911: 131-137.
    [4]
    GAROBY R, DANARED H, ALONSO I, et al. The European Spallation Source design[J]. Physica Scripta, 2018, 93(1): 2-121.
    [5]
    KIM S H, AFANADOR R, BARNHART D L, et al. Overview of ten-year operation of the superconducting linear accelerator at the spallation neutron source[J]. Nuclear Instruments and Methods in Physics Research A, 2017, 852: 20-32.
    [6]
    郁庆长. 质子直线加速器设计研究[J]. 高能物理与核物理,2001,25(5):429-435.YU Changqing. Study on design of proton linacs[J]. High Energy Physics and Nuclear Physics, 2001, 25(5): 429-435(in Chinese).
    [7]
    周立农,张沐天,罗紫华,等. 医用质子直线加速器的设计研究[J]. 高能物理与核物理,1998,22(11):1042-1048.ZHOU Linong, ZHANG Mutian, LUO Zihua, et al. Preliminary design of a dedicated proton therapy linac[J]. High Energy Physics and Nuclear Physics, 1998, 22(11): 1042-1048(in Chinese).
    [8]
    刘世耀. 质子治疗设备的现状和发展[J]. 基础医学与临床,2005,25(2):123-127.LIU Shiyao. Current situation and development of proton therapy equipment[J]. Basic & Clinical Medicine, 2005, 25(2): 123-127(in Chinese).
    [9]
    肖永川,巩克凡,荣林艳. 漂移管直线加速器高功率波导窗的物理设计[J]. 强激光与粒子束,2013,25(8):2031-2034.XIAO Yongchuan, GONG Kefan, RONG Linyan. Design of high power RF window for drift tube linac[J]. High Power Laser and Particle Beams, 2013, 25(8): 2031-2034(in Chinese).
    [10]
    KANG Y, CHAMPION M, LEE S W, et al. High power RF couplers and windows at ORNL Spallation Neutron Source[C]∥The 3rd Worldwide Meeting on Fundamental RF Power Coupler. [S. l.]: [s. n.], 2017.
    [11]
    张雪,王勇,范俊杰,等. 金属壁与介质窗之间次级电子倍增效应的研究[J]. 物理学报,2014,63(16):167901.ZHANG Xue, WANG Yong, FAN Junjie, et al. Multipactor phenomenon between metal and dielectric window[J]. Acta Physica Sinica, 2014, 63(16): 167901(in Chinese).
    [12]
    张巨先,荀燕红,陈丽梅,等. 高纯氧化铝陶瓷材料的焊接性能研究[J]. 真空电子技术,2006(4):14-16.ZHANG Juxian, XUN Yanhong, CHEN Limei, et al. Study of high pure alumina ceramic to metal joining[J]. Vacuum Electronics, 2006(4): 14-16(in Chinese).
    [13]
    王茜,苏党帅,焦晓静,等. 几种高功率微波介质窗材料的研究综述[J]. 材料导报,2009,23(14):329-331.WANG Qian, SU Dangshuai, JIAO Xiaojing, et al. Review of research on high power microwave dielectric window materials[J]. Materials Review, 2009, 23(14): 329-331(in Chinese).
    [14]
    张巨先. 低介电损耗、细晶Al2O3陶瓷材料应用性能研究[J]. 真空电子技术,2013(4):19-22.ZHANG Juxian. Review on application properties of low dielectric loss and fine grained Al2O3 ceramics[J]. Vacuum Electronics, 2013(4): 19-22(in Chinese).
    [15]
    袁广江,卢玉华,罗积润,等. 蓝宝石输出窗的成功封接[J]. 真空科学与技术学报,2004,24(4):299-302.YUAN Guangjiang, LU Yuhua, LUO Jirun, et al. Vacuum sealing of sapphire output windows in high power microwave device fabrication[J]. Chinese Journal of Vacuum Science and Technology, 2004, 24(4): 299-302(in Chinese).

Catalog

    Article views (268) PDF downloads (1078) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return