强流脉冲离子束核物理参数诊断技术初步研究

  • 摘要: 在“闪光二号”加速器产生的强流脉冲离子束(IPIB)调试过程中采用复合法进行参数诊断。主要测量质子与 C靶的核反应所产生的放射性核素的活度,从而确定离子数目。采用PIN探测器和闪烁体光电倍增管(光电管)监测瞬发γ射线和轫致辐射 X射线,用热释光探测器(TLD)监测漂移管外部的轫致辐射并确定了相应的屏蔽方法。采用偏压离子收集阵列测量离子束流密度分布,采用固体核径迹探测器 CR-39初步测量离子束流。

     

    Abstract: The preliminary experimental results for parameter diagnostics of intensepulsed ion beams from the FLASH Ⅱ accelerator were reported. The ion number of anintense pulsed ion beam were experimentally determined by monitoring delayed radio-activity from protons induced nuclear reactions in a ~(12)C target. The prompt γ-rays anddiode bremsstrahlung X--rays were measured with PIN semi--conductor detector and aST401 plastic scintillator detector. The bremsstrahlung distribution outside of the drifttube was detected with a thermoluminescent detector and the shielding design was alsodetermined. The current densities of beam were measured with biased ion collector array. The ion beams were also recorded with a CR--39 detector.

     

/

返回文章
返回