基于CFD方法格架局部阻力系数计算模型研究

Calculation Model Research of Local Resistance Coefficient for Spacer Grids Based on CFD Methodology

Science and Technology on Reactor System Design Technology Laboratory,Nuclear Power Institute of China, Chengdu 610213, China

摘要: 为了研制高性能燃料组件，定位格架的阻力特性直接关系到燃料组件的热工性能和水力相容性。本文针对5×5规模的定位格架，从流动阻力的基本原理出发，利用CFD方法研究并建立了格架局部阻力特性的理论计算模型，并对计算结果进行验证。结果表明，基于计算模型获得的格架局部阻力系数与直接模拟结果基本一致，验证了计算模型的准确性。
- 燃料组件 ,
- CFD ,
- 定位格架 ,
- 局部阻力系数
Abstract: In order to develop high-performance fuel assemblies, resistance characteristics of spacer grid are directly related to thermal performance and hydraulic compatibility of fuel assemblies. Based on basic principles of flow resistance, the calculation model of local resistance characteristics for 5×5 spacer grids was studied and built by using CFD method and the calculation results were validated. The results show that the local resistance coefficients from calculation model are generally in agreement with those from direct simulation.
- fuel assembly ,
- CFD ,
- spacer grid ,
- local resistance coefficient

[1]	LIU C C, FERNG Y M. Numerically simulating the thermal-hydraulic characteristics within the fuel rod bundle using CFD[J]. Nuclear Engineering and Design, 2010, 240: 3078-3086.
[2]	DOMINGUEZ-ONTIVEROS E E, HASSAN Y A. Non-intrusive experimental investigation of flow behavior inside a 5×5 rod bundle with spacer grids using PIV and MIR[J]. Nuclear Engineering and Design, 2009, 239: 888-899.
[3]	NAVARRO M A, SANTOS A A C. Evaluation of a numerical procedure for flow simulation of a 5×5 PWR rod bundle with a mixing vane spacer[J]. Progress in Nuclear Energy, 2011, 53（8）: 1190-1196.
[4]	陈畏葓，张虹，朱力，等. CFD方法在棒束定位格架热工水力分析中的应用研究[J]. 核动力工程，2009，30(5)：34-38.CHEN Weihong, ZHANG Hong, ZHU Li, et al. Research on application of CFD method in thermal-hydraulic performance analysis of rod bundle grid[J]. Nuclear Power Engineering, 2009, 30(5): 34-38(in Chinese).
[5]	IMAIZUMI M, ICHIOKA T. Development of CFD method to evaluate 3-D flow characteristics for PWR fuel assembly[C]∥Transaction of the 13th International Conference on Structural Mechanics in Reactor Technology (SMIRT 13). [S. l.]: [s. n.], 1995.
[6]	IDELCHIK I E. Handbook of hydraulic resistance[M]. 2nd ed. Washington: Hemisphere Publishing Corporation, 1986.
[7]	陈杰，陈炳德，张虹. 燃料组件格架几何建模及网格划分技术[C]∥核动力工程热工流体专集. [出版地不详]：[出版者不详]，2010.