Advanced Search
HAN Zhibo, YANG Hongguang, ZHANG Jiantong. Development and Application of High Temperature Burst Facility of Thin-walled Tube[J]. Atomic Energy Science and Technology, 2020, 54(4): 751-756. DOI: 10.7538/yzk.2019.youxian.0611
Citation: HAN Zhibo, YANG Hongguang, ZHANG Jiantong. Development and Application of High Temperature Burst Facility of Thin-walled Tube[J]. Atomic Energy Science and Technology, 2020, 54(4): 751-756. DOI: 10.7538/yzk.2019.youxian.0611
shu

Development and Application of High Temperature Burst Facility of Thin-walled Tube

  • Division of Reactor Engineering Technology Research, China Institute of Atomic Energy, Beijing 102413, China

More Information
    Graphical Abstract
    • Abstract
  • In order to obtain the high temperature burst properties of the cladding for fuel assembly and core components, high temperature burst facility of thin-walled tube was developed, which is mainly composed of high pressure gas source unit, test atmosphere unit, heating unit, test bench and measurement and control unit. The facility can achieve a maximum test temperature of 1 200 ℃, a maximum heating rate of 10 ℃/s, and a maximum test pressure of 100 MPa. It can complete two kinds of tests: Isothermal high temperature burst under the normal operation condition and transient-heating high temperature burst under the simulated accident condition of PWR. The transient-heating high temperature burst test of 316L stainless steel thin-walled tube was completed by using the facility. The data of high temperature burst strength (ultimate hoop stress) and total circumference elongation were obtained under the conditions of 600-1 200 ℃ and heating rate of 5 ℃/s. The results of verification test of the burst facility and the burst test of the stainless steel thin-walled tube show that the developed high temperature burst facility of thin-walled tube meets the test requirements. And the test is flexible and convenient, with high control accuracy.
    • FullText(HTML)
    • References (20)
  • [1]
    EJ 498—89三十万千瓦压水堆核电厂控制棒组件设计和制造技术条件[S]. 北京：中国核工业总公司，1989.
    [2]
    NB/T 20057.3—2012压水堆核电厂反应堆系统设计堆芯第3部分：燃料组件[S]. 北京：中国原子能出版社，2012.
    [3]
    NB/T 20057.4—2012压水堆核电厂反应堆系统设计堆芯第4部分：燃料相关组件[S]. 北京：中国原子能出版社，2012.
    [4]
    NAGASE F, FUKETA T. Behavior of pre-hydrided Zircaloy-4 cladding under simulated LOCA conditions[J]. Nuclear Science and Technology, 2005, 42(2): 209-218.
    [5]
    KIM J H, LEE M H, CHOI B K, et al. Deformation of Zircaloy-4 cladding during a LOCA transient up to 1 200 ℃[J]. Nuclear Engineering and Design, 2004, 234: 157-164.
    [6]
    JEONG Y H, PARK S Y, LEE M H, et al. Out-of-pile and in-pile performance of advanced zirconium alloys (HANA) for high burn-up fuel[J]. Nuclear Science and Technology, 2006, 43(9): 977-983.
    [7]
    NAGASE F, CHUTO T, FUKETA T. Behavior of high burn-up fuel cladding under LOCA conditions[J]. Nuclear Science and Technology, 2009, 46(7): 763-769.
    [8]
    MCKINNON M A. Cladding strength and pellet relocation testing results from tritium target rods[R]. Richland, Washington: Pacific Northwest Laboratory, 1992.
    [9]
    张长义，徐远超，杨启法，等. M5合金包壳管高温爆破性能[M]∥中国原子能科学研究院年报. 北京：原子能出版社，2006：220-221.
    [10]
    周静，王正品，高巍，等. M5合金室温爆破性能研究[J]. 铸造技术，2010，31(4)：433-436.ZHOU Jing, WANG Zhengpin, GAO Wei, et al. Study on the room temperature blasting properties of M5 zirconium alloy[J]. Foundry Technology, 2010, 31(4): 433-436(in Chinese).
    [11]
    彭继华，李文芳，BECHADE Jean-Luc，等. 织构对锆合金拉伸和爆破性能的影响[J]. 材料研究与应用，2007，1(2)：122-126.PENG Jihua, LI Wenfang, BECHADE Jean-Luc, et al. Study on the effect of texture on tension and burst properties of zirconium alloys[J]. Materials Research and Application, 2007, 1(2): 122-126(in Chinese).
    [12]
    田春燕，周长善，杨继才，等. Zr-4包壳管高温内压爆破性能研究[C]∥国产Zr-4合金性能研究论文集. 北京：原子能出版社，1994：66-68.
    [13]
    陈波全，彭倩，洪晓峰，等. 氢化物取向对Zr-4包壳管室温拉伸和爆破性能的影响[J]. 核动力工程，2019，40(1)：60-64.CHEN Boquan, PENG Qian, HONG Xiaofeng, et al. Effect of hydride orientation on tensile and bursting properties of Zr-4 cladding tubes at room temperature[J]. Nuclear Power Engineering, 2019, 40(1): 60-64(in Chinese).
    [14]
    温敦古，谭军，陈刘涛，等. 核用锆合金包壳管内压爆破试验及性能研究[J]. 材料研究与应用，2016，10(1)：48-52.WEN Dungu, TAN Jun, CHEN Liutao, et al. Study on the burst tests and properties of zirconium alloys for nuclear reactor[J]. Materials Research and Application, 2016, 10(1): 48-52(in Chinese).
    [15]
    黄玉才，张述诚，尚成宇，等. 压水堆燃料棒锆-4包壳在大破口LOCA条件下的鼓胀爆破实验[J]. 核科学与工程，1997，17(1)：45-51.HUANG Yucai, ZHANG Shucheng, SHANG Chengyu, et al. Zircaloy-4 cladding ballooning and burst experiment on PWR fuel rod under LB-LOCA conditions[J]. Chinese Journal of Nuclear Science and Engineering, 1997, 17(1): 45-51(in Chinese).
    [16]
    丁学锋，杜彦亭，刘建章，等. 管材内压闭端爆破测试系统的研制[J]. 原子能科学技术，2003，37（增刊）：98-101.DING Xuefeng, DU Yanting, LIU Jianzhang, et al. Development of tester for burst property of close-end tube[J]. Atomic Energy Science and Technology, 2003, 37(Suppl.): 98-101(in Chinese).
    [17]
    王德华，袁改焕，李恒羽. 核用锆合金管材爆破试验工艺的改进[J]. 稀有金属快报，2006，25(10)：36-38. WANG Dehua, YUAN Gaihuan, LI Hengyu. Improvement of burst test for zirconium alloy tube applied in reactor[J]. Rare Metals Letters, 2006, 25(10): 36-38(in Chinese).
    [18]
    李江江，杜彦亭，热合曼·艾比布力. 锆管强度检测系统的研究与设计[J]. 液压与气动，2011(9)：25-29.LI Jiangjiang, DU Yanting, Rahman·Hebibul, et al. The study and design of super-high pressure tube burst test system[J]. Chinese Hydraulics & Pneumatics, 2011(9): 25-29(in Chinese).
    [19]
    ASTM B353-12 (Reapproved 2017)Standard specification for wrought zirconium and zirconium alloy seamless and welded tubes for nuclear service (except nuclear fuel cladding)[S]. USA: ASTM International, 2017.
    [20]
    ASTM B811-13 (Reapproved 2017)Standard specification for wrought zirconium alloy seamless tubes for nuclear reactor fuel cladding[S]. USA: ASTM International, 2017.
    • Related Articles

  • Related Articles

    [1]HAN Zhibo, YANG Hongguang, ZHANG Jiantong, YUAN Xiaoming, LIU Shanshan. Effect of Coating and Heat Treatment on High Temperature Burst Property of Stainless Steel Thin-walled Tube[J]. Atomic Energy Science and Technology, 2020, 54(11): 2182-2187. DOI: 10.7538/yzk.2020.youxian.0316
    [2]MIN Qi, ZHANG Li, WU Xin-xin, ZHAI Jun-peng. Pipe Stress Analysis for Support Cooling System of High Temperature Gas-cooled Reactor[J]. Atomic Energy Science and Technology, 2015, 49(zengkan1): 332-336. DOI: 10.7538/yzk.2015.49.S0.0332
    [3]DONG Ping, WANG Hong, LI Jian, SUN Guang-ai, LIAO Zhe, YANG Jiang-rong. Residual Stress in Welded Beryllium Ring by Neutron Diffraction and Finite Element Modeling[J]. Atomic Energy Science and Technology, 2015, 49(12): 2255-2260. DOI: 10.7538/yzk.2015.49.12.2255
    [4]DONG Liang, HUI Hu, TANG Xiao-ying. Mechanical Property Test of Domestic A508 Steel Based on Small Bursting Test[J]. Atomic Energy Science and Technology, 2015, 49(12): 2227-2233. DOI: 10.7538/yzk.2015.49.12.2227
    [5]WEN Jing, YANG Hong-yi, YU Hong, WANG Ming-zheng. Development of V2MB Used to Linearize Stress Results From VENUS[J]. Atomic Energy Science and Technology, 2008, 42(增刊2): 562-566. DOI: 10.7538/yzk.2008.42.suppl2.0562
    [6]YIN Qing-liao, XU Zhao, WU Xin-xin, HE Shu-yan, SUN Yu-liang. Design of Prestressed Concrete Pressure Vessel Residual Heat Removal System for Modular HighTemperature GasCooled Reactor[J]. Atomic Energy Science and Technology, 2007, 41(1): 74-78. DOI: 10.7538/yzk.2007.41.01.0074
    [7]DING Xue-feng, DU Yan-ting, LIU Jian-zhang, LI Zhong-kui, ZHANG Jian-jun, JIN Ming-zhe, ZHU Ren-zong (1. Northwest Institute for Non-ferrous Metal Research, Xi'an 710016, China; 2. Xi'an J iaotong University, Xi'an 710049, China). Development of Tester for Burst Property of Close-end Tube[J]. Atomic Energy Science and Technology, 2003, 37(S1): 98-98. DOI: 10.7538/yzk.2003.37.S1.0098
    [8]YU Hua-jin(China Institute of Atomic Energy, P. O. Box 275-95, Beijing 102413, China). Calculation and Assessment of the Stress Intensity for the Main Vessel in China Experimental Fast Reactor[J]. Atomic Energy Science and Technology, 2003, 37(2): 116-116. DOI: 10.7538/yzk.2003.37.02.0116
    [9]DONG Ping, CHEN Yu ze, ZOU Jue sheng (China Academy of Engineering Physics, P.O.Box 919 71, Mianyang 621900, China). Prediction of Temperature and Stress Fields in Beryllium Ring During Electron Beam Welding by Finite Element Analysis[J]. Atomic Energy Science and Technology, 2002, 36(3): 209-209. DOI: 10.7538/yzk.2002.36.03.0209
    [10]ZHANG Ying chao, CHEN Peng (China Institute of Atomic Energy, P.O. Box 275 64, Beijing 102413, China). Analysis of PCMI Threshold of Fuel Rod for Qinshan Nuclear Power Plant[J]. Atomic Energy Science and Technology, 2000, 34(S1): 86-86. DOI: 10.7538/yzk.2000.34.S1.0086

  • Cited by

    Periodical cited type(10)

    1. 牟玉鹏，刘剑术，李小斌，张红娜，李凤臣，韩冶，王泽鸣，柴宝华. 航天器用水热管冻结特性数值模拟研究. 航天器工程. 2024(01): 84-91 .
    2. 李忠，王姝妙，梁文峰，马明阳，滕春明，谢奇林. 环道型高温钠热管设计与验证. 原子能科学技术. 2024(12): 2515-2523 . 本站查看
    3. 白玉潭，刘家驹，张平. 大直径高温热管在高热流密度下的性能实验研究. 科学通报. 2023(Z1): 271-281 .
    4. 李世斌，马锐，王林. 高速飞行器组合式热防护系统研究进展. 战术导弹技术. 2023(01): 8-21 .
    5. 张友佳，蒋顺利，周慧辉，袁德文，吴张华，徐建军，闫晓，苏东川，田文喜. 高温热管耦合热声发电机运行特性试验研究. 清华大学学报(自然科学版). 2023(08): 1204-1212 .
    6. 杨义博，许辉，郑义，张红. 大长径比高温热管传热性能试验研究. 兵器装备工程学报. 2023(10): 280-286 .
    7. 周佐新，黄金印，张红星，赵亮. 我国航天器热控技术发展及展望. 航天器工程. 2023(06): 1-9 .
    8. 刘剑术，牟玉鹏，李小斌，张红娜，李凤臣，韩冶，王泽鸣，柴宝华. 钠热管传热极限过渡数值模拟分析. 航天器工程. 2023(06): 123-129 .
    9. 张端，许辉，张红，贺美娟. 锂热管开发及水平状态下启动特性试验研究. 能源研究与利用. 2022(02): 16-20 .
    10. 马誉高，张英楠，余红星，黄善仿. 丝网芯内钠薄液膜蒸发与毛细特性研究. 原子能科学技术. 2022(06): 1154-1162 . 本站查看

    Other cited types(3)

Catalog

    Get Citation
    PDF
    XML
    Article views (234) PDF downloads (1149) Cited by(13)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles
    Links

    Website Copyright©2023 Atomic Energy Science and Technology  京ICP备12043220号-2

    Address：Box 65, P.O. Box 275, Beijing   Postal Code：102413

    Email：yznkxjs7285@163.com   Tel:（010）69357285,69358024

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return